≡ Menu

Hello everyone,

I have noticed a shift in the crafty world. We’ve seen spritzers, misters and sprays for a little while now but I feel like theres now even more focus on mixed media in the industry. I have never really kept myself to just one area, I am an experimenter, a dabbler, and i thought it was time to introduce some more mediums into my projects….or at least try.

I liked the end result of this card, but it did take a little while to free myself into becoming used to inky, painty mess on the craft table. Here is how I made it….

First I dug out my watercolours. I want to tell you that it is not a fancy watercolour set – its a bog standard one a bit like this one on amazon at £2.10. The lid has got little circular reservoirs so i picked up some water, swooshed the brush around the paint and then transferred it over to the reservoir side. To create the drip effect you need a very wet mixture, so i kept going until i had a painty water mix, then I dabbed the brush onto the card- letting the paint drip off the brush and rest on the paper. Then I took a straw and whilst holding the card at a 50 -60 degree angle, I blew the paint to encourage it to drip down to the bottom. Once I had done this, I got rid of the excess that was on the brush by painting a bit on a spare piece of white card. I repeated this for all the colours and purposefully blew the paint across one another to create an artsy look.

After my paint was dry (quick blast of the heat gun did wonders to speeding this along) I used a Martha Stewart punch to punch a butterfly from white card and then I punched another butterfly from the painted bits on the scratch card. I then added a white butterfly to the card along the paint splodge line, and then using a small glue dot, put the painted butterfly on top. This way I could bend the wings of the butterfly up to create dimension and the white butterfly underneath created something almost like a shadow, which made the top one really stand out!

I thought the card looked pretty cool, but it needed some final bits to finish it off – a few gems, twine and an embossed greeting did the trick!

Thanks for stopping by!

x

{ 0 comments }

It was a Sunday and it was sunny so we finally decided to make a start on the garden. After a quick trip to the garden centre we were ready to roll. Piper was eager to get stuck in, but then we realised that we didn’t have a sun hat for little miss P. Even with factor 50, I wasn’t prepared to take any risks. Hhhmmm, what to do?

Here’s what – grab an old pair of pre-pregnancy PJs that no longer fit and use the material to fashion a sun hat!

I wasn’t aiming for perfection, I was aiming for an ‘any old thing that will stay on her head and protect her from the sun’. And to be honest, that’s what I got. My original plan was to just throw it away but I thought I would have a go at rescuing it and I am happy I tried – I am delighted with the final result!

Here’s how it came together: I cut the fabric into four squares and then measured Pipers head. I lay the fabric on the cutting mat at an angle so it looked like a diamond and then i drew a bell shape onto the fabric. Two things to note: instead of a curved top I kept a point- the idea being that when i sewed them all together the four (roughly) 90 degree angles would come together, and secondly- the width of the bell was slightly more than 1/4 of the circumference of P’s noggin.  Once I had one bell shape cut out, I folded it in half and trimmed it down so it was symmetrical and then I cut all four pieces to the identical shape.

Whiirrrrrr, whirrrrrrrr, whirrrrrrrr! After about three minutes I had sewn all the seams and created a shape that resembled a hat. I didn’t even stop to change the purple tread in the sewing machine. It stayed on and did the job.

The next day I traced around the bell shape and cut four more panels using a floral fabric, stitched them together to create a hat shape. Then, when I had more time I carefully pinned the two hats right-sides together and stitched along the seam, leaving a 2 inch gap. Once i turned it the right way round I top stitched in purple along the edge.  This made the whole thing a lot more sturdy and also means that we now have a reversible sun hat!

Job Done!

 

{ 0 comments }

Hey everyone.

Remember me? Im the one who has been absent for months. Whoops. Sorry about that. Im not sure how, but all of a sudden I am back in the crafty mindset. Its one of those ‘don’t-ask-questions-just-run-with-it’ things! Now that the evenings are lighter I am starting to feel like my time after dinner can be used more productively, rather than spending it snuggling under a blanket (which has been my go-to reflex for the past while). Viva la craftiness!

May is upon us and that means that it has started – the massive influx of birthdays. The year starts nice and slow, and as soon as we hit May, we have my Mum-in-law’s birthday, My Dad-in-law’s birthday, my brother-in-law’s birthday, and then it gets to mid month and its my brother, then my sister at the end.

Luckily my mojo came back in time. Well,,,, almost in time. I did my usual trick of making the cards but not posting them on time. I am notoriously bad at posting cards. I wish there was a rehab for that because i feel so guilty that i dont even want to send the card in the end. 🙁

So here’s a nice little mix of cards that I have made for the Oman clan.

First a card for Craig’s Mum.

Marvellous day

Nice and flowery and springy.

So i have just typed the title of the card into this post and spell check has just informed me that marvellous has two Ls! Oh dear! RUBBISH! I hate it when that happens! Ah well, lets hope she doesn’t notice! LOL

Next up is a card for dad. I saw this Father text as a print on Pinterest and it looks like i didn’t actually pin it to my board so unfortunately i cant link it back. If i find it again I will link it up. I thought it looked really cool. I am planning on making more like this if i can be creative enough to think of character traits.

 

 

And of course, a card from Piper for Granda Oman. I used the left over pieces of alpha’s from a previous card that I made for my dad’s birthday in January. The design is basic but I love the finished piece!

 

 

Next stop is the cards for little Steven. Steven is much younger than Craig so these are boy cards. I am actually really excited to show these cards to you because Piper was very involved in making these ones! I brought some basic supplies in to the living room and Piper helped me make this card, and then insisted in making a card all by herself! It was so adorable and I sure was one proud mumma! I may have given a little creative direction, but she did all the sticking by herself! 😀

Here’s the card from Craig and I

And here’s is Piper’s finished card

 

And saving the best til last… look at the concentration

and the HUGE grin! 😀

 

<3

I love my crafty girl!   xx

 

{ 0 comments }